Ancor 317925 Marine Grade Electrical Nylon Insulated Adhesive Lined Heat Shrink Disconnects Male16 to 14-Gauge, 25-Pack

#ad
Ancor 317925 #ad - Shrinks to form a water tight seal and the ultimate vibration and strain relief. Heat activated adhesive built into the sleeve of the heat shrink tubing. For more information go to P65Warnings. Ca. Gov. 16-14 male heatshrink disconnects - 25-PackAncor heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing.

Tinned for corrosion resistance, Pure copper for maximum current flow. When heated, these connectors form a water tight seal and the ultimate vibration and strain relief. Features:tinned for corrosion resistancepure copper for maximum current flowBrazed seam for maximum strengthUL listed and CSA recognized WARNING: This product can expose you to chemicals including di2-ethylhexylphthalate dehp which is known to the State of California to cause cancer, birth defects or other reproductive harm.

Ancor 317925 Marine Grade Electrical Nylon Insulated Adhesive Lined Heat Shrink Disconnects Male16 to 14-Gauge, 25-Pack #ad - 25 pack of 16-14 awg male Heat Shrink Disconnects. Ul 310 and cSA recognized.

#ad



Ancor 311225 Marine Grade Electrical Nylon Insulated Adhesive Lined Heat Shrink Ring Terminals 16 to 14-Gauge, Size 8 Screw, 25-Pack

#ad
Ancor 311225 #ad - Nylon insulator, water, preferred by experts, chemicals, for Marine Grade resistance to sunlight, oil, vibration and cut-through damage. Tinned for corrosion resistance. Heat activated adhesive lining provides impervious seal to salt water, acids, oil, and sunlight as well as providing strain relief. Adhesive lined heat shrink ring terminalsgauge size: 16-14screw Size: #8Quantity: 25Product Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC.

Shrinks at 257 deg. Ul listed and csa recognized Highest shrink ratio - shrinks to 1/3 original size. Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance, Pure copper for maximum current flow. F/125 deg. C. Brazed seam for maximum strength. Heat activated adhesive built into the sleeve of the heat shrink tubing.

Ancor 311225 Marine Grade Electrical Nylon Insulated Adhesive Lined Heat Shrink Ring Terminals 16 to 14-Gauge, Size 8 Screw, 25-Pack #ad - Pure copper for maximum current flow. C to 110 deg. C.

#ad



Ancor 309199 Marine Grade Electrical Nylon Insulated Adhesive Lined Heat Shrink Butt Connectors 16 to 14-Gauge, 100-Pack

#ad
Ancor 309199 #ad - Heat activated adhesive built into the sleeve of the heat shrink tubing. 100 pack of 16-14 awg heat Shrink Butt Connectors. Adhesive line heat shrink tubing shrinks to form a tight seal and the ultimate in vibration and strain relief. Ul listed and CSA recognized. Shrinks to form a water tight seal and the ultimate vibration and strain relief.

Tinned for corrosion resistance, Pure copper for maximum current flow. Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance, Pure copper for maximum current flow. Ul listed and CSA recognized. Marine gradetm heat shrink butt connectors feature tinned copper for maximum current flow and corrosion resistance.

Ancor 309199 Marine Grade Electrical Nylon Insulated Adhesive Lined Heat Shrink Butt Connectors 16 to 14-Gauge, 100-Pack #ad - Wire range: 16-14 quantity: 100 8 screw, 16-14 awg, 25 pack of Heat Shrink Ring Terminals. Heat activated adhesive built into the sleeve of the heat shrink tubing.

#ad



Ancor Marine Grade Nylon Ring Terminals

#ad
#ad - Heat activated adhesive built into the sleeve of the heat shrink tubing. Ul listed and CSA recognized. Barrels are designed to tightly grip the wire with the least effort. Ancor's marine grade terminals differ from automotive terminals by being designed for the harsh marine environment. Tinned copper gives the least electrical resistance but the most corrosion protection.

Double crimp, funnel entry. 100 pack of 16-14 awg heat Shrink Butt Connectors. Ul listed and CSA recognized. Ul 486c. Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance, Pure copper for maximum current flow. 8 screw, 16-14 awg, 25 pack of Heat Shrink Ring Terminals.

Ancor Marine Grade Nylon Ring Terminals #ad - Nylon insulators are easy to crimp and will not split. Heat activated adhesive built into the sleeve of the heat shrink tubing. Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance, Pure copper for maximum current flow. Pack of Nylon Ring Terminals.

#ad



Ancor Marine Grade Primary Wire and Battery Cable Red, 25 Feet, 16 AWG

#ad
Ancor Marine Grade Products 182803 #ad - Nylon insulators are easy to crimp and will not split. Manufactured from individual copper strands and tinned to perform in the harshest marine environments. The ancor marinco electrical group primary wire is the perfect wiring accessory that you need to always keep in your ever growing boating tool kit. 25 feet of red 16 AWG marine grade wire.

Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance, Pure copper for maximum current flow. Pack of Nylon Ring Terminals. They are constructed with premium vinyl insulation that is rated at 600 volts, oil, 105 deg C dry and 75 deg C wet, heat, stays flexible even in extreme cold -40 deg F/C and resists salt water, battery acid, gasoline, abrasion and ultra-violet radiation.

Ancor Marine Grade Primary Wire and Battery Cable Red, 25 Feet, 16 AWG #ad - 8 screw, 16-14 awg, 25 pack of Heat Shrink Ring Terminals. Exceeds all ul 1426, us coast guard Charter boat CFR title 46 and ABYC standards. Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance, Pure copper for maximum current flow. Heat activated adhesive built into the sleeve of the heat shrink tubing.

Ul 486c. Heat activated adhesive built into the sleeve of the heat shrink tubing.

#ad



Ancor Marine Grade Duplex Cables

#ad
Ancor 121310 #ad - Ul listed and CSA recognized. 8 screw, 16-14 awg, 25 pack of Heat Shrink Ring Terminals. Barrels are designed to tightly grip the wire with the least effort. Ancor's marine grade terminals differ from automotive terminals by being designed for the harsh marine environment. Tinned copper gives the least electrical resistance but the most corrosion protection.

Double crimp, funnel entry. Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance, Pure copper for maximum current flow. Pack of Nylon Ring Terminals. Heat activated adhesive built into the sleeve of the heat shrink tubing. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection.

Ancor Marine Grade Duplex Cables #ad - Ul 486c. Ancor duplex cables are made to surpass the highest UL Boat Cable standards with ultra flexible Type 3/Class K stranding to resist fatigue due to vibration and flexing. Manufactured from individual copper strands and tinned to perform in the harshest marine environments. Ancor's proprietary premium vinyl insulation stays flexible even in extreme cold and resists salt water, oil, battery acid, gasoline and ultra-violet radiation.

Exclusive insulation is rated at 600 volts, 105° C dry and 75° C Inner conductors are correctly color-coded to ABYC standards. Ul listed and CSA recognized.

#ad



Ancor 210613 Marine Grade Electrical Double Male-Female Adapter 25-Pack

#ad
Ancor 210613 #ad - Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance, Pure copper for maximum current flow. Marine grade specialty connectors double male-Female Adapter Wire Range. 250 tab qty 5 8 screw, 16-14 awg, 25 pack of Heat Shrink Ring Terminals. Ul 486c. Ul listed and CSA recognized.

Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. Heat activated adhesive built into the sleeve of the heat shrink tubing. Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance, Pure copper for maximum current flow.

They are constructed with premium vinyl insulation that is rated at 600 volts, 105 deg C dry and 75 deg C wet, oil, stays flexible even in extreme cold -40 deg F/C and resists salt water, gasoline, heat, battery acid, abrasion and ultra-violet radiation. Manufactured from individual copper strands and tinned to perform in the harshest marine environments.

Ancor 210613 Marine Grade Electrical Double Male-Female Adapter 25-Pack #ad - Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. Exceeds all ul 1426, us coast guard charter boat CFR title 46 and ABYC standards. 100 pack of 16-14 awg heat Shrink Butt Connectors. The premium vinyl insulation is rated at 600 volts, stays flexible even in extreme cold -40 deg F/C and resists salt water, oil, battery acid, 105 deg C dry and 75 deg C wet, gasoline, heat, abrasion and ultra-violet radiation.

#ad



Ancor 220011 Heat Shrink Butt Connector Kit

#ad
MARINCO 220011 #ad - Ul 486c. Exceeds all ul 1426, us coast guard Charter boat CFR title 46 and ABYC standards. Brand: Ancor. Manufactured from individual copper strands and tinned to perform in the harshest marine environments. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection.

They are constructed with premium vinyl insulation that is rated at 600 volts, 105 deg C dry and 75 deg C wet, gasoline, battery acid, oil, stays flexible even in extreme cold -40 deg F/C and resists salt water, heat, abrasion and ultra-violet radiation. Manufactured from individual copper strands and tinned to perform in the harshest marine environments.

Ancor 220011 Heat Shrink Butt Connector Kit #ad - Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. Exceeds all ul 1426, us coast guard charter boat CFR title 46 and ABYC standards. When it comes to marine electrical wiring, connectors Also have to be able to stand up to the corrosive ocean environment.

General purpose wire and components designed for on-shore applications caused significant problems as electrical systems became more sophisticated and demanding. 25 feet of red 16 AWG marine grade wire. Ancor was founded over twenty years ago to solve electrical problems experienced by Mariners as they ventured offshore in large numbers.

The premium vinyl insulation is rated at 600 volts, heat, gasoline, stays flexible even in extreme cold -40 deg F/C and resists salt water, 105 deg C dry and 75 deg C wet, oil, battery acid, abrasion and ultra-violet radiation.

#ad



Ancor 252264 Marine Grade Electrical Heavy Duty Tinned Copper Lugs 2-Gauge, Size 1/4 Screw, 2-Pack

#ad
Ancor 252264 #ad - Marine gradetm lugs are heavy duty, pure copper for maximum current flow, and tinned for corrosion resistance and easy soldering. They are constructed with premium vinyl insulation that is rated at 600 volts, stays flexible even in extreme cold -40 deg F/C and resists salt water, battery acid, heat, 105 deg C dry and 75 deg C wet, gasoline, oil, abrasion and ultra-violet radiation.

Manufactured from individual copper strands and tinned to perform in the harshest marine environments. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. Exceeds all ul 1426, us coast guard charter boat CFR title 46 and ABYC standards. 25 feet of red 16 AWG marine grade wire.

Ancor 252264 Marine Grade Electrical Heavy Duty Tinned Copper Lugs 2-Gauge, Size 1/4 Screw, 2-Pack #ad - Heat shrink butt connector Kit. Barrels are designed to tightly grip the wire with the least effort. Ancor's marine grade terminals differ from automotive terminals by being designed for the harsh marine environment. Tinned copper gives the least electrical resistance but the most corrosion protection. Double crimp, funnel entry.

Wire size: #2 screw Size: 1/4 in. Heat activated adhesive built into the sleeve of the heat shrink tubing.

#ad



Blue Sea Systems 12 Volt Dash Socket

#ad
Blue Sea Systems 1011-BBS #ad - Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. Features watertight cap, easy installation and twist locks securely with plug. Heat activated adhesive built into the sleeve of the heat shrink tubing. Shrinks to form a water tight seal and the ultimate vibration and strain relief.

Tinned for corrosion resistance, Pure copper for maximum current flow. Exceeds all ul 1426, us coast guard Charter boat CFR title 46 and ABYC standards. Corrosion resistant materials to ensure solid contact and low voltage drop. Ul 486c. 25 feet of red 16 AWG marine grade wire. Seamless barrel design allows for maximum strength when crimped.

Blue Sea Systems 12 Volt Dash Socket #ad - 100 pack of 16-14 awg heat Shrink Butt Connectors. Ul listed and CSA recognized. Large contact surfaces for good electrical connection. Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance, Pure copper for maximum current flow. The premium vinyl insulation is rated at 600 volts, battery acid, stays flexible even in extreme cold -40 deg F/C and resists salt water, heat, 105 deg C dry and 75 deg C wet, oil, gasoline, abrasion and ultra-violet radiation.

Ancor 210613, anc210613.

#ad



Ratcheting Single Crimp

#ad
MARINCO 703010 #ad - 4 color-coated cavities for different wire sizes. General purpose wire and components designed for on-shore applications caused significant problems as electrical systems became more sophisticated and demanding. Twist lock system-plug locks securely into socket. Heat activated adhesive built into the sleeve of the heat shrink tubing.

Barrels are designed to tightly grip the wire with the least effort. Ancor's marine grade terminals differ from automotive terminals by being designed for the harsh marine environment. Tinned copper gives the least electrical resistance but the most corrosion protection. Double crimp, funnel entry. Ul 486a. Heat activated adhesive built into the sleeve of the heat shrink tubing.

Ratcheting Single Crimp #ad - Ul listed and CSA recognized. Brand: Ancor. 100 pack of 16-14 awg heat Shrink Butt Connectors. Manufactured from 100% heavy-duty annealed tinned copper, providing for maximum current flow while resisting corrosion from salt and moisture. Nylon insulators are easy to crimp and will not split. 2 pack of 2 awg heavy-duty lugs with a 1/4" Screw Size Ring.

#ad