As an Amazon Associate I earn from qualifying purchases.
Lippert #ad - Rv travel trailer jack stabilizer kit comes complete with everything needed for DIY installation. Easy installation — with no welding required, this system can easily bolt-on to your landing gear and RV’s frame for a one-time installation.
Fully equipped — kit comes complete with inner tubes, outer tubes and all necessary mounting and installation hardware. Compatibility — this stabilizer kit was designed to work with most major RV jack assemblies — including, scissor, front landing gear and telescoping.
Fit type: Universal Fit. Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying. Three configurations — available in three sizes: standard 5th Wheel Kit, Short 5th Wheel Kit and Travel Trailer.
Lippert #ad - Three configurations — available in three sizes: standard 5th Wheel Kit, Short 5th Wheel Kit and Travel Trailer. The kit was designed for installation by your dealer or the do-it-yourself on fifth-wheel RVs with 58 inches or greater distance between the two front landing gear legs.
Rv fifth-wheel jack stabilizer kit comes complete with everything needed for DIY installation. Compatibility — this stabilizer kit was designed to work with most major RV jack assemblies — including, scissor, front landing gear and telescoping.
Designed to eliminate side-to-side and front-to-rear RV movement and shaking; Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying. Fully equipped — kit comes complete with inner tubes, outer tubes and all necessary mounting and installation hardware. Easy installation — with no welding required, this system can easily bolt-on to your landing gear and RV’s frame for a one-time installation.
Lippert #ad - Fully equipped — kit comes complete with inner tubes, outer tubes and all necessary mounting and installation hardware. Compatibility — this stabilizer kit was designed to work with most major RV jack assemblies — including, scissor, front landing gear and telescoping.
Easy installation — with no welding required, this system can easily bolt-on to your landing gear and RV’s frame for a one-time installation.
Lippert #ad - Easy installation — set up only takes 15-20 minutes — plus, this kit stays attached to your steps for easy storage. Protection — the solid stance even helps protect your bottom entry step from wear and sagging.
Compatibility — the solid stance fits all lippert double and triple Steel Radius Entry Steps and double and triple Alumi-Tread Hybrid Aluminum Entry Step configurations, plus a wide-variety of competitor assemblies.
Lippert #ad - Powerfully designed — no more cranking. Thoughtful innovation — we’ve equipped our psx1 with integrated breaker technology designed to protect users from damaging their RV by tripping the breaker if the circuit is overloaded while lifting the trailer — and it helps prevent side-to-side movement while extending and retracting.
Quality — backed by a name you can trust with a reliable one-year manufacturer’s warranty for added peace of mind on the road. A flip of a switch is all it takes to take the sway out of your RV or trailer.
Dimensions: 79” l x 6. With the psx1, campers can stop wasting time and energy with manual cranks. 2” w x 19” h, 58 pounds. Legs extend up to 30”. Rugged versatility — we designed our stabilization system to automatically adjust to uneven, rugged terrain. Each leg operates independently, navigating the surface until safely secured in place. Linc remote compatible.
Beech Lane #ad - Wide stabilizer top bar provides more support- a wider top bar delivers more surface area contact with the RV to ensure even better stability. Corrosion resistant aluminum construction rated- top quality aluminum and marine grade ss material construction deliver years of consistent performance.
If you experience any issue down the line you are guaranteed a free replacement or complete refund. Instantly reduces rocking and wobbling inside your rv- tired of the rock n' roll wobble inside your rv? this universal stabilizer solves your wobble problems without breaking the bank.
For years of outdoor use-. Universal fit only for RVs that measure 12" to 26. 5" off the ground. Storage space is at a premium in your RV and this product makes sure to utilize it well. Collapses in half for small storage footprint- the patent pending hinged top bar design allows this stabilizer to fold in half for storage effectively reducing required storage space by 50% compared to competitors.
Lippert #ad - Legs extend up to 30”. With the psx1, campers can stop wasting time and energy with manual cranks. Quality — backed by a name you can trust with a reliable one-year manufacturer’s warranty for added peace of mind on the road. Thoughtful innovation — we’ve equipped our psx1 with integrated breaker technology designed to protect users from damaging their RV by tripping the breaker if the circuit is overloaded while lifting the trailer — and it helps prevent side-to-side movement while extending and retracting.
Rugged versatility — we designed our stabilization system to automatically adjust to uneven, rugged terrain. Powerfully designed — no more cranking. A flip of a switch is all it takes to take the sway out of your RV or trailer. Includes non-waterproof switch with hatch box, harness and reset breaker.
Valterra #ad - Folds for easy storage. Sets up in minutes, no tools needed. Using two--front and rear or on both sides--makes RV rock solid. Fits frames 14"H to 28"H.
Lippert #ad - Switch not included, mounting hardware provided. Each leg operates independently, navigating the surface until safely secured in place. Thoughtful innovation — we’ve equipped our psx1 with integrated breaker technology designed to protect users from damaging their RV by tripping the breaker if the circuit is overloaded while lifting the trailer — and it helps prevent side-to-side movement while extending and retracting.
2” w x 19” h, 58 pounds. Legs extend up to 30”.
With the psx1, campers can stop wasting time and energy with manual cranks. A flip of a switch is all it takes to take the sway out of your RV or trailer. Rugged versatility — we designed our stabilization system to automatically adjust to uneven, rugged terrain. Powerfully designed — no more cranking.
1. Lippert
#adLippert 191025 JT's Strong Arm Travel Trailer Stabilizer Kit , Gray
#adFully equipped — kit comes complete with inner tubes, outer tubes and all necessary mounting and installation hardware. Compatibility — this stabilizer kit was designed to work with most major RV jack assemblies — including, scissor, front landing gear and telescoping.
More information #ad
Designed to eliminate side-to-side and front-to-rear RV movement and shaking. Eliminates chassis movement — the jt’s strong arm stabilizer kit is designed to eliminate chassis movement in your 5th wheel RV or travel trailer using the same engineering as a race car chassis. Fit type: Universal Fit. Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying. Three configurations — available in three sizes: standard 5th Wheel Kit, Short 5th Wheel Kit and Travel Trailer.
| Brand | Lippert #ad |
| Manufacturer | Lippert #ad |
| Height | 4.5 Inches |
| Length | 28.75 Inches |
| Weight | 39 Pounds |
| Width | 4.25 Inches |
| Part Number | 191025 |
| Model | 191025 |
More information #ad
2. Lippert
#adLippert 191023 JT's Strong Arm Fifth-Wheel Jack Stabilizer Kit
#adRv fifth-wheel jack stabilizer kit comes complete with everything needed for DIY installation. Compatibility — this stabilizer kit was designed to work with most major RV jack assemblies — including, scissor, front landing gear and telescoping.
More information #ad
Eliminates chassis movement — the jt’s strong arm stabilizer kit is designed to eliminate chassis movement in your 5th wheel RV or travel trailer using the same engineering as a race car chassis. Designed to eliminate side-to-side and front-to-rear RV movement and shaking; Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying. Fully equipped — kit comes complete with inner tubes, outer tubes and all necessary mounting and installation hardware. Easy installation — with no welding required, this system can easily bolt-on to your landing gear and RV’s frame for a one-time installation.
| Brand | Lippert #ad |
| Manufacturer | Lippert #ad |
| Height | 4.5 Inches |
| Length | 28.75 Inches |
| Weight | 40 Pounds |
| Width | 4.25 Inches |
| Part Number | 191023 |
| Model | 191023 |
More information #ad
3. Lippert
#adLippert JT's Strong Arm™ Short Fifth-Wheel Jack Stabilizer Kit
#adEasy installation — with no welding required, this system can easily bolt-on to your landing gear and RV’s frame for a one-time installation.
More information #ad
Three configurations — available in three sizes: standard 5th Wheel Kit, Short 5th Wheel Kit and Travel Trailer. Eliminates chassis movement — the jt’s strong arm stabilizer kit is designed to eliminate chassis movement in your 5th wheel RV or travel trailer using the same engineering as a race car chassis.| Brand | Lippert #ad |
| Manufacturer | Lippert #ad |
| Height | 5 Inches |
| Length | 29.5 Inches |
| Weight | 39 Pounds |
| Width | 40 Inches |
| Part Number | 191024 |
| Model | 191024 |
| Warranty | 1 Year |
More information #ad
4. Lippert
#adLippert Solid Stance RV Step Stabilizer Kit for 5th Wheels, Travel Trailers and Motorhomes
#adCompatibility — the solid stance fits all lippert double and triple Steel Radius Entry Steps and double and triple Alumi-Tread Hybrid Aluminum Entry Step configurations, plus a wide-variety of competitor assemblies.
More information #ad
No dismantling and reassembling required. Adjustable — compatible with height ranges of 5” to 14”, this kit comes with dual, individually adjustable legs that have four adjustment angles to adapt to uneven terrains. More stability — this stabilizer gives you the ground support you need to eliminate unwanted bounce and instability when going in and out of your RV. Fit type: Universal Fit.| Brand | Lippert #ad |
| Manufacturer | Lippert #ad |
| Height | 3.38 Inches |
| Length | 22.63 Inches |
| Weight | 6.5 Pounds |
| Width | 4.38 Inches |
| Part Number | 2020109777 |
| Model | 2020109777 |
More information #ad
5. Lippert
#adLippert Components High Speed Power Stabilizer Jack Kit with Black Waterproof Switch Kit 298707
#adQuality — backed by a name you can trust with a reliable one-year manufacturer’s warranty for added peace of mind on the road. A flip of a switch is all it takes to take the sway out of your RV or trailer.
More information #ad
Includes waterproof switch, harness and reset breaker. Durable construction — built with heavy gauge steel, embossed legs, and a powder-coat finish — when it comes to durability, this power stabilizer was made to withstand the elements and perform with efficiency, day after day. Dimensions: 79” l x 6. With the psx1, campers can stop wasting time and energy with manual cranks. 2” w x 19” h, 58 pounds. Legs extend up to 30”. Rugged versatility — we designed our stabilization system to automatically adjust to uneven, rugged terrain. Each leg operates independently, navigating the surface until safely secured in place. Linc remote compatible.
| Brand | Lippert #ad |
| Manufacturer | Lippert #ad |
| Height | 19 Inches |
| Length | 79 Inches |
| Weight | 100 Kilograms |
| Width | 6.25 Inches |
| Part Number | 298707 |
| Model | 298707 |
| Warranty | 1 Year |
More information #ad
6. Lippert
#adLippert 314597 JT's Strong Arm Stabilizer Electric Jack Adaptor Kit
#adLippert #ad - Designed to attach your electric stabilizer to your JT’s Strong Arm Jack Stabilizer. Easy, diY installation. Includes 4 jack pads. Compatible with JT's Strong Arm Stabilizers sold separately.More information #ad
| Brand | Lippert #ad |
| Manufacturer | Lippert #ad |
| Height | 4 Inches |
| Length | 8 Inches |
| Weight | 0.09 Pounds |
| Width | 0.88 Inches |
| Part Number | 314597 |
| Model | 314597 |
More information #ad
7. Beech Lane
#adPatent Pending, Stops RV Wobble, Adjustable Height of 12" to 26.5", Compact Foldable Design for Easy Storage, Beech Lane Universal RV Stabilizer
#adIf you experience any issue down the line you are guaranteed a free replacement or complete refund. Instantly reduces rocking and wobbling inside your rv- tired of the rock n' roll wobble inside your rv? this universal stabilizer solves your wobble problems without breaking the bank.
More information #ad
Compatible with motorhomes, fifth wheels, trailers, and pop up campers. Beech lane lifetime warranty- unlike other brands that have a short warranty window, beech Lane delivers a LIFETIME WARRANTY on its universal RV stabilizer. For years of outdoor use-. Universal fit only for RVs that measure 12" to 26. 5" off the ground. Storage space is at a premium in your RV and this product makes sure to utilize it well. Collapses in half for small storage footprint- the patent pending hinged top bar design allows this stabilizer to fold in half for storage effectively reducing required storage space by 50% compared to competitors.
| Brand | Beech Lane #ad |
| Manufacturer | Beech Lane #ad |
| Height | 4.3 Inches |
| Length | 17.71 Inches |
| Width | 7 Inches |
| Part Number | BL-212 |
| Model | BL-212 |
| Warranty | Lifetime Manufacturer Warranty |
More information #ad
8. Lippert
#adLippert Components High Speed Power Stabilizer Jack Kit with White Switch Kit 369774
#adMore information #ad
2” w x 19” h, 58 pounds. Each leg operates independently, navigating the surface until safely secured in place. Dimensions: 79” l x 6. Durable construction — built with heavy gauge steel, this power stabilizer was made to withstand the elements and perform with efficiency, and a powder-coat finish — when it comes to durability, embossed legs, day after day. Rugged versatility — we designed our stabilization system to automatically adjust to uneven, rugged terrain. Powerfully designed — no more cranking. A flip of a switch is all it takes to take the sway out of your RV or trailer. Includes non-waterproof switch with hatch box, harness and reset breaker.
| Brand | Lippert #ad |
| Manufacturer | Lippert #ad |
| Height | 19 Inches |
| Length | 79 Inches |
| Weight | 58 Pounds |
| Width | 6.25 Inches |
| Part Number | 369774 |
| Model | 369774 |
| Warranty | 1 Year |
More information #ad
9. Valterra
#adValterra 020106 RV Stabilizer
#adMore information #ad
| Brand | Valterra #ad |
| Manufacturer | Valterra Products LLC #ad |
| Height | 0.93 Inches |
| Length | 5.11 Inches |
| Weight | 3 Pounds |
| Width | 0.93 Inches |
| Part Number | 020106 |
| Model | 20106 |
| Warranty | 1 year |
More information #ad
10. Lippert
#adNo Switch Assembly 337199, Lippert Components High-Speed Power Stabilizer Jack
#ad2” w x 19” h, 58 pounds. Legs extend up to 30”.
More information #ad
Dimensions: 79” l x 6. Quality — backed by a name you can trust with a reliable one-year manufacturer’s warranty for added peace of mind on the road. Durable construction — built with heavy gauge steel, embossed legs, and a powder-coat finish — when it comes to durability, this power stabilizer was made to withstand the elements and perform with efficiency, day after day. With the psx1, campers can stop wasting time and energy with manual cranks. A flip of a switch is all it takes to take the sway out of your RV or trailer. Rugged versatility — we designed our stabilization system to automatically adjust to uneven, rugged terrain. Powerfully designed — no more cranking.
| Brand | Lippert #ad |
| Manufacturer | Lippert #ad |
| Height | 19 Inches |
| Length | 79 Inches |
| Weight | 58 Pounds |
| Width | 6.25 Inches |
| Part Number | 337199 |
| Model | 337199 |
| Warranty | 1 Year |
More information #ad
