As an Amazon Associate I earn from qualifying purchases.
UltraPro #ad - Works only with dimmable bulbs and lamps. Includes white and light almond paddles to match any home décor and a blue LED indicator light to locate the switch in a dark room. Switch can be operated manually. Full range dimming – give your space the perfect amount of light with the ability to customize the brightness levels from 0 to 100%.
Wall plate is NOT included. Wirelessly control switch from anywhere through your smartphone, PC or Z-Wave remote. Alexa compatible hub required - requires an alexa supported hub for voice control with Amazon Echo Products Alexa device and hub are sold separately.
In-wall installation with hard wired connections neutral wire required – replace your existing in-wall switch in as little as 15 minutes. Cannot connect directly with ECHO PLUS Only ZigBee products can connect directly to Echo Plus. Customize scenes for day or night, tablet, home or away. Wirelessly control & schedule lights and other devices – schedule timed events for connected devices.
AEOTEC #ad - The slider indicating lights works to reflect different features when working as a dimmer, connection cable x 1, manual x 1, switch, or motor controller. Easy to install, simply plug wallswipe into your nano via the connection port and affix it to your wall.
Note: to connect wallSwipe, it requires Aeotec Nano device running firmware 2. 0 or greater. Z-wave paddle switch extends the power of aeotec’s nano range of in-wall, long-press- swiping and sliding. When installing 2 or more wallSwipes side-by-side, you can disable the gesture control to remove the potential for accidental and incorrect commands.
9 inches afield. Plug outlet plates give your home’s wall switches a modern upgrade. The combination works as a dimmer, one load switch, in-wall range, Nano Shutter, including Nano Dimmer, two loads switch, Nano Switches, and motor controller. The package comes with WallSwipe x 1, and screw x 2. Wallswipe is automatically compatible and dependent on any of aeotec’s Nano, and Dual Nano Switches.
Inovelli #ad - Zwave plus: 700 series Technology, S2 Encryption & SmartStart. Independent control: ceiling Fan 3-Speed + Lights Dimming from a Smart ZWave Switch. Hub compatibility: smartthings, home Assistant, homeSeer, Vera / EZLO, Hubitat, Fibaro & Zipato.
Lumary #ad - Or create an automation to turn on/off the fan and light automatically by sunrise/sunset or when you arrive/leave your house. Timer and automation: control the speed of your ceiling fan and light level by scheduling a timed event or creating a custom scene, at any time of the day. Memory function can keep last setting on fan speed and light level.
Advanced design: special circuitry reduces fan motor noise at low speed. Easily connects to your existing home electrical circuit Hot/Neutral/Fan/Light/Ground and 2. 4ghz wi-fi network, no hub required, no complex steps to program the receiver and remote.
Minimum brightness setting of the dimmer adjustments switch to modify the minimum light level in order to maximize the dimming range if flickering occurs at lower dimming levels. Notice: ①max celling fan load: 1. 25a ②fan speed control method: capacitor series speed control ③fan speed control method: capacitor step-down ④Load Power W Maximum: LED--100W, incandescent lamp--200W ⑤Please turn your fan speed to the highest level, before you install the smart fan dimmer switch.
Hamilton Hills #ad - Wire caps, screws, and the face plate is included with the switch making installation a breeze. Max ceiling fan of 1. 25a and max light of 300W Incandescent. Exceptional quality: we use premium material. A family owned business with simple principles.
Affordable quality in America. Works with LED lighting. We stand by the quality of our product and your experience. Safe and easy to install: our dimmer and fan control comes with comprehensive instructions and is UL listed for full safety.
Universal versatility: the convenience of a dimming light switch along with a 4 speed fan control is now incorporated in one wall switch. 3 generations of excellence: our family has been manufacturing and producing household fixtures and decorative pieces for over 3 generations. Our dimmers and fan controls are manufactured to nationally recognized standards for safety.
UltraPro #ad - Dual ground ports, which are offset to avoid switch box mounting screws, support daisy-chaining in multi-switch setups. Multi-switch compatible – the smart device operates perfectly on its own or seamlessly integrates into multi-switch setups when paired with compatible add-on switches from UltraPro, GE, Enbrighten and Honeywell.
Range extender – the in-wall z-wave switch repeats the signal from your hub or other Z-Wave device to extend wireless range by up to 150ft. Quickfit enhancements are the ideal smart solution for older-style switch boxes, multi-gang configurations or any other application with limited space.
Up to four add-on switches can be connected to the same light, Jasco, fan or appliance. Switch upgrade – easily replace any standard in-wall switch equipped with a neutral wire to remotely turn ON/OFF and create schedules for a wide range of fixtures. Revolutionary, patent-pending design – QuickFit and SimpleWire technologies offer groundbreaking home automation features. Simplewire – auto-detecting line/load terminals support fast installation by identifying line and load wires and configuring the switch accordingly. Black, brown, ivory and light almond options are also available.
GE #ad - Easily replace any standard in-wall switch with the GE Z-Wave Smart Switch to control permanently installed lighting or fans with your mobile device or computer using any Z-Wave certified gateway. Includes white and light almond paddles wall plate not included.
Alexa compatible - requires an alexa supported hub for voice control with echo products Alexa device and hub sold separately. Requires a z-wave certified gateway.
Compatible with the following z-wave certified hubs: smartThings, Vivint, Nexia, Harmony Home Hub Extender, Wink, Vera, ADT Pulse, Trane, HomeSeer, Honeywell, Connect and Iris. Can be controlled in groups of multiple lights or turned on or off within ambient interior lighting scenes. Works with alexa for voice control hub required; Alexa device and hub sold separately.
Delixi #ad - After-sales processingwhen your led is not compatible with our products, You can contact me at any time, if your return time has expired, You can contact me by email, It doesn't matter, I will solve the problem for you right away and you can return the goods for a refund at any time, I will refund you immediately.
Etl certifiedour products are etl certified. Lower left corner of product outer packing box sticker, there is an ETL certification statement. Products meet safety standards, You can buy at ease. 3 speeds fan controlvertical slide control fan speed, When you switch gears, will produce a clear sound, clearly telling you that you have switched gears.
Provides the best dimming performance for dimmable LED bulbs, slider for lights provides for smooth dimming with a noticeable click off when moving slider past the dimmest position. Max load durability and resilience to withstand hard impacts and heavy force, max ceiling fan load of 2. 5a and max light load of 360w incandescent, but there are also incompatible LEDs, Dual slide controls, make sure LED bulbs are the dimmable type, Compatible with most dimmable LEDs, Mainly suitable for incandescent lamps.
UltraPro #ad - Quickfit enhancements are the ideal solution for older-style switch boxes, multi-gang configurations or any other application with limited space. Black, brown, ivory and light almond options are also available. Led, cfl, incandescent and halogen – to retain the full benefit of LED, incandescent and halogen lights, CFL, the device supports all types of light sources.
Changeable paddles – the switch features a removable white rocker-style paddle. Multi-switch operation – the switch is not a standalone device. Quickfit – improved components reduced the housing depth by up to 20% compared to previous models and eliminated the need for heat tabs.
Light-commercial capable – supports 120vac and 277vac for universal use in a variety of systems. The switch is suitable for use in common home 120VAC or light-commercial 277VAC applications without additional equipment. Simplewire – dual ground ports, which are offset to avoid switch box mounting screws, support daisy-chaining in multi-switch setups. Versatile compatibility – partner the add-on switch with any smart switch, GE, dimmer or fan control from UltraPro, Jasco, Enbrighten and Honeywell.
1. UltraPro
#adAlexa and Google Assistant Compatible, 39351, UltraPro Z-Wave Plus Smart Light Dimmer Switch, In-Wall White & Almond Paddles | Repeater Range Extender | ZWave Hub Required
#adWall plate is NOT included. Wirelessly control switch from anywhere through your smartphone, PC or Z-Wave remote. Alexa compatible hub required - requires an alexa supported hub for voice control with Amazon Echo Products Alexa device and hub are sold separately.
More information #ad
Requires a z-wave certified hub - compatible with the following Z-Wave Hubs: Honeywell, Wink, Nexia, Vera, Fibaro, HomeSeer, SmartThings, Ring, ADT, Trane, and more. In-wall installation with hard wired connections neutral wire required – replace your existing in-wall switch in as little as 15 minutes. Cannot connect directly with ECHO PLUS Only ZigBee products can connect directly to Echo Plus. Customize scenes for day or night, tablet, home or away. Wirelessly control & schedule lights and other devices – schedule timed events for connected devices.
| Brand | UltraPro #ad |
| Manufacturer | UltraPro #ad |
| Part Number | 39351 |
| Model | 39351 |
| Warranty | 2-year limited |
More information #ad
2. AEOTEC
#adCurtain Blinds, built-in PIR sensor to Read Gestures, Aeotec WallSwipe, Zwave Switch Wall Panel Controller with Slider for Dimmer Switches, works with all Nano Range products, Appliance
#adNote: to connect wallSwipe, it requires Aeotec Nano device running firmware 2. 0 or greater. Z-wave paddle switch extends the power of aeotec’s nano range of in-wall, long-press- swiping and sliding. When installing 2 or more wallSwipes side-by-side, you can disable the gesture control to remove the potential for accidental and incorrect commands.
More information #ad
Wallswipe’s inbuilt ir sensor extend the control one further, Z-Wave controllers to offer a multitude of different wall switch controls including tap, allowing you to use gestures to control the wall switch from up to 5. 9 inches afield. Plug outlet plates give your home’s wall switches a modern upgrade. The combination works as a dimmer, one load switch, in-wall range, Nano Shutter, including Nano Dimmer, two loads switch, Nano Switches, and motor controller. The package comes with WallSwipe x 1, and screw x 2. Wallswipe is automatically compatible and dependent on any of aeotec’s Nano, and Dual Nano Switches.
| Brand | AEOTEC #ad |
| Manufacturer | Aeotec #ad |
| Height | 13.5 Centimeters |
| Length | 7.1 Centimeters |
| Weight | 0.25 Kilograms |
| Width | 4 Centimeters |
| Part Number | ZW158 |
| Model | ZW158 |
More information #ad
3. Inovelli
#adInovelli Z-Wave Fan & Light Switch Red Series | ZWave Fan Control & Light Dimmer | Independent Controller of Fan Speed & Light Bulbs
#adMore information #ad
Smart switch features: dual leD Notifications, Scene Control, Breeze Mode and 30+ Configurations. Note: this is a two piece kit switch + canopy module, Neutral Wire is Required, AC Motors Only.| Brand | Inovelli #ad |
| Manufacturer | Inovelli #ad |
More information #ad
4. Lumary
#adSmart Fan Control, Neutral Wire Needed, NO Hub Required., Lumary Wi-Fi 4 Speed Ceiling Fan Wall Control with Light Dimmer Switch Compatible with Alexa & Google Assistant
#adAdvanced design: special circuitry reduces fan motor noise at low speed. Easily connects to your existing home electrical circuit Hot/Neutral/Fan/Light/Ground and 2. 4ghz wi-fi network, no hub required, no complex steps to program the receiver and remote.
More information #ad
Separate touch slide controls for fan speed and dimmer, CFL, Halogen, 4 quiet fan speedhigh/medium-high/medium/low and full range of dimming work with most brands of ceiling fans and dimmable LED, incandescent bulbs in it. Dual control: designed to work with ceiling fans with lights. Easy installation: compatible with standard outlet wall box and 1/2/3/4 gang traditional screw or decor snap-on wallplate. Minimum brightness setting of the dimmer adjustments switch to modify the minimum light level in order to maximize the dimming range if flickering occurs at lower dimming levels. Notice: ①max celling fan load: 1. 25a ②fan speed control method: capacitor series speed control ③fan speed control method: capacitor step-down ④Load Power W Maximum: LED--100W, incandescent lamp--200W ⑤Please turn your fan speed to the highest level, before you install the smart fan dimmer switch.
| Brand | Lumary #ad |
| Manufacturer | Lumary #ad |
More information #ad
5. Hamilton Hills
#adHamilton Hills White 4 Speed Ceiling Fan Wall Control with LED Dimmer Light Switch | Wall Face Plate Included
#adAffordable quality in America. Works with LED lighting. We stand by the quality of our product and your experience. Safe and easy to install: our dimmer and fan control comes with comprehensive instructions and is UL listed for full safety.
More information #ad
Our dimmers are made to strict trade-secret standards and pass a rigorous 8 point inspection. Adjust and dim led lights with our ELV dimming capabilites and convert a 3 speed fan to a 4 speed fan. Universal versatility: the convenience of a dimming light switch along with a 4 speed fan control is now incorporated in one wall switch. 3 generations of excellence: our family has been manufacturing and producing household fixtures and decorative pieces for over 3 generations. Our dimmers and fan controls are manufactured to nationally recognized standards for safety.
| Brand | Hamilton Hills #ad |
| Manufacturer | Hamilton Hills #ad |
| Weight | 0.33 Pounds |
| Part Number | HH1161-L |
| Model | HH1161-L |
More information #ad
6. UltraPro
#adAlexa and Google Assistant Compatible, 39348, UltraPro Z-Wave Plus Smart Light Switch, In-Wall White Paddles Built-In Repeater Range Extender ZWave Hub Required
#adRange extender – the in-wall z-wave switch repeats the signal from your hub or other Z-Wave device to extend wireless range by up to 150ft. Quickfit enhancements are the ideal smart solution for older-style switch boxes, multi-gang configurations or any other application with limited space.
More information #ad
Quickfit – improved components reduced the housing depth by up to 20% compared to previous Z-Wave models and eliminated the need for heat tabs. Voice control – enjoy the convenience of voice control with Google Assistant or Amazon Alexa when connected through a compatible Z-Wave hub. Up to four add-on switches can be connected to the same light, Jasco, fan or appliance. Switch upgrade – easily replace any standard in-wall switch equipped with a neutral wire to remotely turn ON/OFF and create schedules for a wide range of fixtures. Revolutionary, patent-pending design – QuickFit and SimpleWire technologies offer groundbreaking home automation features. Simplewire – auto-detecting line/load terminals support fast installation by identifying line and load wires and configuring the switch accordingly. Black, brown, ivory and light almond options are also available.
| Brand | UltraPro #ad |
| Manufacturer | Jasco Products Company #ad |
| Height | 4.1 Inches |
| Length | 1.75 Inches |
| Width | 1.75 Inches |
| Part Number | 43216-3803 |
| Model | 39348 |
| Warranty | 2-year limited |
More information #ad
7. GE
#ad12722, GE Z-Wave Wireless Smart Lighting Control Light Switch, Repeater & Range Extender, In-Wall, Zwave Hub Required- Works with SmartThings Wink and Alexa, On/Off Paddle, White & Lt. Almond Paddles
#adAlexa compatible - requires an alexa supported hub for voice control with echo products Alexa device and hub sold separately. Requires a z-wave certified gateway.
More information #ad
Cannot connect directly with echo PLUS Only ZigBee products can connect directly to Echo Plus. Requires in-wall installation with hard-wired connections - Neutral wire REQUIRED. Compatible with the following z-wave certified hubs: smartThings, Vivint, Nexia, Harmony Home Hub Extender, Wink, Vera, ADT Pulse, Trane, HomeSeer, Honeywell, Connect and Iris. Can be controlled in groups of multiple lights or turned on or off within ambient interior lighting scenes. Works with alexa for voice control hub required; Alexa device and hub sold separately.
| Brand | GE #ad |
| Manufacturer | Jasco #ad |
| Height | 2.45 Inches |
| Length | 8.2 Inches |
| Weight | 0.5 Pounds |
| Width | 7.25 Inches |
| Part Number | 12722 |
| Model | 12722 |
More information #ad
8. Delixi
#ad60 Hz, White 1 Pack, Single-Pole, 120 Vac, 360W Incandescent Load, 2.5 A, DELIXI White 3 Speed Ceiling Fan Wall Speed Control with LED Dimmer Light Switch
#adEtl certifiedour products are etl certified. Lower left corner of product outer packing box sticker, there is an ETL certification statement. Products meet safety standards, You can buy at ease. 3 speeds fan controlvertical slide control fan speed, When you switch gears, will produce a clear sound, clearly telling you that you have switched gears.
More information #ad
Provides single pole control of ceiling fans, Easy Shifting, not for variable type fans or remote controlled. Added gear position descriptionone control switch for 3 settings: variable speed, ofF, M, down slide light turns dark or off, H, Up slide LED brighten, L. Provides the best dimming performance for dimmable LED bulbs, slider for lights provides for smooth dimming with a noticeable click off when moving slider past the dimmest position. Max load durability and resilience to withstand hard impacts and heavy force, max ceiling fan load of 2. 5a and max light load of 360w incandescent, but there are also incompatible LEDs, Dual slide controls, make sure LED bulbs are the dimmable type, Compatible with most dimmable LEDs, Mainly suitable for incandescent lamps.
| Brand | Delixi #ad |
| Manufacturer | DELIXI #ad |
More information #ad
9. UltraPro
#adUltraPro Add-On Switch for UltraPro Smart Lighting Controls ONLY | NOT A STANDALONE SWITCH | White Paddles | for 3 4 & 5-Way Multi-Location Installations, 39350
#adChangeable paddles – the switch features a removable white rocker-style paddle. Multi-switch operation – the switch is not a standalone device. Quickfit – improved components reduced the housing depth by up to 20% compared to previous models and eliminated the need for heat tabs.
More information #ad
Unique advancements make the smart controls easier to install and more reliable than ever. The add-on switch functions the same as the primary switch. Revolutionary, patent-pending design – QuickFit and SimpleWire technologies offer groundbreaking home automation features. Light-commercial capable – supports 120vac and 277vac for universal use in a variety of systems. The switch is suitable for use in common home 120VAC or light-commercial 277VAC applications without additional equipment. Simplewire – dual ground ports, which are offset to avoid switch box mounting screws, support daisy-chaining in multi-switch setups. Versatile compatibility – partner the add-on switch with any smart switch, GE, dimmer or fan control from UltraPro, Jasco, Enbrighten and Honeywell.
| Brand | UltraPro #ad |
| Manufacturer | Jasco Products Company #ad |
| Height | 4.12 Inches |
| Length | 1.75 Inches |
| Width | 1.63 Inches |
| Part Number | 39350 |
| Model | 39350 |
| Warranty | 2-year limited |
More information #ad
